Categories

LATHES

LATHES

Dental Lathes include some of the products:• 16B Lathe with Chuk/Changer/HighBase• 26A Red Wing High Base Lathe • Splash Hood W/light & Shield

Click to see products by Suppliers


View All
KEYSTONE KEYSTONE
$11.65 - $43.40
Handler ManufacturingHandler Manufacturing
$14.95 - $3,395.00
Show:
Sort By:

KEYSTONE

<div> <p>We offer two types of Arbor Band Chucks. The first is for standard lathes with 3/8” shaft. Also we have a shaft for standard 3/4” bands (1/4” shank). These bands come in left or right hand sides of the lathe. Sold individually.</p> </div> <div> <p>&nbsp;</p> </div>
$11.65
<div> <ul> <li>We offer two types of Arbor Band Chucks.</li> <li>The first is for standard lathes with 3/8” shaft.</li> <li>Also, we have a shaft for standard 3/4” bands (1/4” shank).</li> <li>These bands come in left or right-hand sides of the lathe.</li> <li>Sold individually.</li> </ul> </div> <div> <p>&nbsp;</p> </div>
$14.85
<div> <ul> <li>The Bur Chuck is designed to be used with small burs and mandrels as long as they do not exceed 1/4 inch diameter.</li> <li>It is to be used with lathes that have a tapered shaft.</li> <li>Sold individually.</li> </ul> </div> <div> <p>&nbsp;</p> </div>
$43.40

Handler Manufacturing

<h1> Tapered Chuck - 1/2" Or 5/8" Diameter </h1><br/><br/><p>A tapered chuck manufactured of steel alloy for use on 1/2" [1.3cm] straight or 5/8" [0.6cm] straight shafts. Available for the Left or Right side of a polishing motor. This chuck provides the user with a heavy duty chuck for use with buffs, brushes and lead centered accessories. Mounts with screws. </p>
$14.95
<h1>Sta-Kleen Shield</h1><br/><br/><p>A Clear acrylic shield is a must for OSHA compliance. Adjustable to any vertical position within 180 degrees for maximum protection from flying debris and wet pumice. Wipes clean with a damp cloth; can be used on all Handler splash hoods and on other models as well. </p>
$29.95
<h1> Flexible Safety Shield For Red Wing Lathes </h1><br/></br><p> Handler designed the shield to provide adjustable protection against flying debris. This is a must for OSHA compliance. It's clear acrylic 6" X 8" shield is attached to a 13" adjustable arm. A strong magnetic base is supplied with each unit to allow the unit to adhere to magnetic surfaces.The magnetic of the 32SHLD base may be removed for the adjustable arm to be attached to a non-magnetic surface using a wood screw or a machine bolt. The shield should be located at Model Trimmers, Polishing Motors and any other work station where dust and debris are present. </p>
$69.95
<p>The 86D Splash Hood is a standard 83WL splash hood supplied with an 86B Protective Clear acrylic Shield. This hood may be fitted with either flange or cut-out with flange, for connection to a dust collector. Specify light on right (R) or left (L). Shipping Wgt.: 4 lbs [1.5 Kg] Unit Dimensions: 12” high x 6” wide x 10” deep [30cm x 15cm x 25cm]</p> <p></p> <p></p>
$87.00
<h1>Resin Splash Hood W/Light (Right Or Left) &amp; Shield</h1> <p></p> <p></p> <p>Resin Splash Hood with shield and insert pan</p> <p></p> <p></p>
$88.95
<div><span style="font-size: 12px;">Aluminum Splash Hood with light, shield and insert pan</span></div> <div><span style="font-size: 12px;">Light on left: 86D-L or Light on the right: 86D-R</span></div> <div><span style="font-size: 12px;">Shipping Wgt.: 4 lbs [1.8Kg]</span></div> <div><span style="font-size: 12px;">Dimensions: 12” H x 6” W x 10” D</span></div> <p></p> <p></p>
$99.95
<h1>Aluminum Splash Hood, No Light with Shield - 6" Wide</h1><br/><br/><p>Aluminum Splash Hood with Shield and insert pan </p>
$103.95
<h1>Aluminum Splash Hood, No Light with Shield - 8" Wide</h1><br/><br/><p>Aluminum Splash Hood with Shield and insert pan </p>
$103.95
<h1>Aluminum Splash Hood with Shield and insert pan</h1><br/><br/><p> Aluminum Splash Hood with Shield and insert pan. Add “A” for 3” diameter flange, “B” for flange and blastgate</p>
$113.95
<h1>Avenger Splash Hood (Hazardous Containment Device)</h1> <p></p> <p></p> <p>Handler is excited to announce The 86A Avenger, the latest innovation in the dental lab to help contain contaminants during various polishing and grinding applications Handler revolutionized polishing applications over the years with the Red Wing lathes, polishing units and splash hoods. Handler aluminum and resin splash hoods are used in more offices and dental labs than any other containment device when polishing or grinding. The 86A Avenger now takes the application to a new level of safety and cleanliness. The 86A Avenger is a low cost way to contain hazardous contaminants when polishing or grinding using a Red Wing Lathe or hand piece. The 86A Avenger manufactured of solid, sturdy resin material has two parts, a bottom and a hood that has no hardware or fixed attachments. It is now so easy and efficient to clean and disinfect after every application making it compliant with OSHA and OSAP safety standards. The 86A Avenger has a removable clear acrylic shield specially coated with a material to protect it against scratching. The footprint of The 86A Avenger is larger and the spacious cavity makes it comfortable and ergonomic for any user. It also has a 3” dimple in the rear that can be cut off to add suction.</p> <p></p> <p></p>
$169.00
<p>26 Red Wing Lathe A full 1/4 HP, 1725/3450 rpm two speed polishing lathe with 6” [15.2cm] shaft height (115 Volts/60Hz). Designed and built for use as a polishing lathe, its tapered shafts will accept standard dental tapered chucks. The 6” [15.2cm] shaft height of the 26 will allow the technician to utilize larger diameter buffing wheels for pumice and dry polishing operations.This unit may be supplied with 1/2” [1.3cm] straight shafts when specified.</p> <p></p> <p>Available in 115 Volts/ 50Hz 26A, 220 Volts/50Hz 26E and 220 Volts/60Hz 26C at additional charge.</p> <p>NOTE: Specify No. 26S for motor with 1/2” [1.3cm] straight shafts.<br /> Shipping Wgt.: 41 lbs [18.6 Kg]<br /> Unit Dimensions.: 15 1/2” long x 8” wide x 9” high [39cm x 20cm x 23cm]</p>
$309.00
<h1>Red Wing Lathe, 1/4 Hp, 2 Speed, Hi Base</h1> <p></p> <p></p> <p>A full 1/4 HP, 1725/3450 rpm two-speed polishing lathe with 6” [15.2cm] shaft height. Designed and built for use as a polishing lathe, its tapered shaft will accept standard dental tapered chucks. Includes a left and right chuck remover for easy removal of chucks. The 6” [15.2cm] shaft height of the 26 will allow the technician to utilize larger diameter buffing wheels for pumice and dry polishing operations. The 26 is manufactured to provide years of durable service when used for polishing and grinding. 115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost.</p> <p></p> <p></p>
$389.00

Supplier: KEYSTONE
We offer two types of Arbor Band Chucks. The first is for standard lathes with 3/8” shaft. Also we..
$11.65

Supplier: KEYSTONE
We offer two types of Arbor Band Chucks. The first is for standard lathes with 3/8” shaft. ..
$14.85

Supplier: Handler Manufacturing
Tapered Chuck - 1/2" Or 5/8" Diameter A tapered chuck manufactured of steel alloy for use on 1/2" [..
$14.95

Supplier: Handler Manufacturing
Sta-Kleen ShieldA Clear acrylic shield is a must for OSHA compliance. Adjustable to any vertical pos..
$29.95

Supplier: KEYSTONE
The Bur Chuck is designed to be used with small burs and mandrels as long as they do not exceed..
$43.40

Supplier: Handler Manufacturing
Flexible Safety Shield For Red Wing Lathes Handler designed the shield to provide adjustable prote..
$69.95

Supplier: Handler Manufacturing
The 86D Splash Hood is a standard 83WL splash hood supplied with an 86B Protective Clear acrylic Shi..
$87.00

Supplier: Handler Manufacturing
Resin Splash Hood W/Light (Right Or Left) & Shield Resin Splash Hood with shield and insert..
$88.95

Supplier: Handler Manufacturing
Aluminum Splash Hood with light, shield and insert pan Light on left: 86D-L or Light on the right: ..
$99.95

Supplier: Handler Manufacturing
Aluminum Splash Hood, No Light with Shield - 6" WideAluminum Splash Hood with Shield and insert pan ..
$103.95

Supplier: Handler Manufacturing
Aluminum Splash Hood, No Light with Shield - 8" WideAluminum Splash Hood with Shield and insert pan ..
$103.95

Supplier: Handler Manufacturing
Aluminum Splash Hood with Shield and insert pan Aluminum Splash Hood with Shield and insert pan. Add..
$113.95

Supplier: Handler Manufacturing
Avenger Splash Hood (Hazardous Containment Device) Handler is excited to announce The 86A Aveng..
$169.00

Supplier: Handler Manufacturing
26 Red Wing Lathe A full 1/4 HP, 1725/3450 rpm two speed polishing lathe with 6” [15.2cm] shaft he..
$309.00

Supplier: Handler Manufacturing
Red Wing Lathe, 1/4 Hp, 2 Speed, Hi Base A full 1/4 HP, 1725/3450 rpm two-speed polishing lathe..
$389.00