Categories

SUCTION

SUCTION

Dental Suction product contains:• 52CSU Etcher Catcher• 60U Dust Collector• 550 Porta Vac Bench Top Dust Collector• Fishmouth

Click to see products by Suppliers


View All
Dental Distributors Inc.Dental Distributors Inc.$27.99 - $27.99
KEYSTONE KEYSTONE $32.95 - $32.95
Handler ManufacturingHandler Manufacturing$11.95 - $7,195.00
DENTAURUM Inc.DENTAURUM Inc.$133.00 - $2,014.00
Show:
Sort By:

Handler Manufacturing

<h1>Flexi-Hose -Specify 3" Or 4"</h1><br/><br/><p>Available in standard 3” [7.6cm] or 4” [10cm] diameter for use with dust collector. Sold per foot in 1 to 25 foot lengths. LARGER SIZE FLEXI-HOSE AVAILABLE AT ADDITIONAL COST.</p>
$11.95
<p>87210 Fishmouth This fishmouth is designed for use on the bench top. Supplied with a 5 1/2” x 3” [14cm x 8cm] diameter rear duct, the 87210 may be connected to a dust collector via flexible ducting or directly into a 210BG Blast Gate which is mounted on the vertical riser of a laboratory bench. Manufactured of Quality Resin which is impervious to germicides. This fishmouth is contoured for use with a Lathe or a handpiece.</p> <p>Shipping Weight: 3 lbs [1.4 Kg]</p> <p>Unit Dimensions: 6 3/4” high x 15” deep x 6 1/2” wide [38cm x 20cm x 16cm]</p>
$70.00
<p>For use on the bench top to assist in the collection of grinding and polishing debris while connected to a dust collector. The fishmouth is a widemouthed type hood which directs debris created by lathe or handpiece operations into a dust collector.</p> <p>Manufactured of Quality Resin which is impervious to germicides, the 87 is fitted with its own 3” [7.6cm] diameter suction cut-off. The fishmouth is contoured for use with a Lathe or a handpiece.</p> <p>Shipping Weight: 3 lbs [1.4 Kg]<br /> Unit Dimensions: 6 3/4” high x 11 1/2” deep x 6 1/2” wide [30cm x 19cm x 17cm]</p> <p>87A-4 : Same as above with 4" Flange and cut-out for connecting to suction.</p>
$88.00
<h1>Silencer</h1> <p></p> <p></p> <p>A necessary accessory for the 60U Dust Collector, The 60 U/S silencer mounts on top of the 60U and lowers the airflow noise level approximately 20%-25%. Constructed of sheet steel and lined with acoustical foam to reduce noise level of 60U. A must for quiet offices and labs.</p> <p></p> <p></p>
$109.95
<p>550 Porta-Vac Bench Top Dust Collector A favorite of dental offices since its introduction several years ago, the 550 Porta-Vac is perfect for bench top light grinding and polishing with a hand piece or lathe. Featured enhancements include 40% more suction power, compact in line suction design, removable resin clean out tray, replaceable clear acrylic shield and reusable and replaceable pleated rear filter.</p> <p></p> <div>A favorite of dental offices since its introduction several years ago, the 550 Porta-Vac is perfect for bench top light grinding and polishing with a hand piece or lathe. Featured enhancements include 40% more suction power, compact in line suction design, removable resin clean out tray, replaceable clear acrylic shield and reusable and replaceable pleated rear filter. The compact and lightweight 550 comes with a fluorescent light for hours of cool, bright operation and will collect 0.5 microns of dust and larger particles. Easy operation; take it out of the box, install the light, plug it in, and it is ready for use. The durable white powder coated heavy gauge steel frame is built to last, and the unit is made in the USA by Handler. </div> <div></div> <div>Shipping Weight: 18 lbs </div> <div>Unit Dimensions: 8 1/2” W x 12” H x 14” D [21cmx30cmx36cm]</div> <div></div> <div><strong>Available in 220V/50Hz – Order Model 550-E</strong></div>
$439.99
<p>62-II SUPER SUCKER: Designed to provide excellent suction to a single bench top work position. The 62-II Super Sucker develops 110 CFM (cubic feet / minute) at a static pressure of 63" of H20 and is one of the most powerful single station dust collectors available.</p> <p>62-II SUPER SUCKER: Designed to provide excellent suction to a single bench top work position. The 62-II Super Sucker develops 110 CFM (cubic feet / minute) at a static pressure of 63" of H20 and is one of the most powerful single station dust collectors available. Designed for continuous duty, the double walled disposable filter bag is easily removed through the front access door with the removal of two thumb screws. A rear internal activated charcoal filter aids in the removal of acrylic monomer odors. The 62-II Super Sucker is shipped complete with the dust collector with variable speed controlled suction motor, 4 feet if 2-1/2" flex hose and a fishmouth. A 6" resin splash hood may be order in lieu of the fishmouth. This unit is not recommended for collection of ALO dusts.</p> <p>Shipping Weight: 35 lbs (16 Kg)</p> <p>Unit Dimensions: 10" wide x 15-1/2" deep x 13" high (25cm x 39cm x 35.5cm)</p>
$519.97
<p>Designed to provide maximum suction capacity, the No.62 Super Sucker develops 225 cfm (6.36M3/min) suction capacity through two top inlets. Dust and grindings are entrapped in a removable, disposable paper filter.</p> <p>Designed to provide maximum suction capacity, the No.62 Super Sucker develops 225 cfm (6.36M3/min) suction capacity through two top inlets. Dust and grindings are entrapped in a removable, disposable paper filter. A secondary polyester filter entraps finer dusts. A third filter made of activated charcoal removes up to 80% of acrylic monomer odors. Shipped complete with two 87210 fishmouths, two four foot sections of 3” (7.6cm) flexihose and four clamps, this unit is an excellent addition to the smaller laboratory which is collecting dusts sporadically.</p> <p>Shipping Weight: 42 lbs [19.1 Kg]</p> <p>Unit Dimensions: 14 3/4” wide x 8 1/2" deep x 17 3/8 “ high [37cm x 22cm x 44cm]</p>
$589.00
<h1>Bench Top Dust Collector</h1><br/><br/><p>76D-0 Bench Top Dust Collector A bench top polishing unit designed to provide 365 CFM (cubic feet/minute) [172m3/min.] suction intake through two frontal suction inlets. The 76D-0 is constructed of heavy gauge sheet steel, finished in a durable, baked coating. Two 10” x 12” x 2” [25cm x 30cm x 5cm] (480 cubic inches) [7.9m3] reversible and replaceable filters entrap dusts as small as 5 microns and larger. This unit is shipped complete ready for use with your lathe or it may be purchased with a No. 26A Red Wing Polishing Motor (SEE 76D-3). Two aluminum pumice/polishing pans are provided to hold wet pumice and dry grindings. This unit is NOT recommended for use with gypsum dust or ALO. </p>
$599.00
<h1> Super Sucker</h1><br/><br/><p> Designed to provide maximum suction capacity, the No.62 Super Sucker develops 225 CFM suction capacity through two top inlets. Dust and grindings are entrapped in a removable, disposable paper filter. A secondary polyester filter entraps finer dusts. A third filter made of activated charcoal removes up to 75% of acrylic monomer odors. Shipped complete with two fishmouths, two four foot sections of 3” (7.6cm) flexihose and four clamps, this unit is an excellent addition to the smaller laboratory. The 62 Super Sucker is not for use with aluminum oxide and is designed for intermittent use. For continuous use, or use with aluminum oxide, see Model 60UFC.</p>
$749.00
<p>A necessary accessory for the 60U Dust Collector, The 60 U/S silencer mounts on top of the 60U and lowers the airflow noise level approximately 20%-25%. Constructed of sheet steel and lined with acoustical foam to reduce the noise<span style="font-size: 13px;"> level of 60U. A must for quiet offices and labs.</span></p> <ul> <li>The 60U dust collector is designed to provide suction to two 3” [7.6cm] work positions, simultaneously.</li> <li>Powered by a ball bearing, capacitor start, industrially rated suction motor.</li> <li>The 60U contains a suction capacity of 400 CFM (cubic feet/minute) [189m3/min.] or 200 CFM [94m3/min.] through each of two 3” [7.6cm] suction inlets provided.</li> <li>Dust and grindings are cleaned from the air intakes by 14 shakable cloth filter bags which effectively entrap 0.5-micron particles and larger.</li> <li>Manufactured to fit under existing work benches or new installations, its compact size delivers central system suction power.</li> <li>Finished in a durable, baked coating. Suction - 400 CFM (cubic feet/minute) [189m3/min.] through two inlets provided.</li> <li>Filter Area - 14 shakeable filter bags, 16 sq. ft. filter area. Cleaning - External foot shaker, internal dust tray.</li> <li>Shipping Wgt.: 80 lbs [36.3 Kg]</li> <li>Unit Dimensions: 15 1/8” W x 14 7/8” D x 22“ H [38cm x 37.8cm x 55.9cm</li> <li>Available in 115V/60Hz, 230V/50Hz, 230V/60Hz, and 115V/50Hz. </li> </ul> <p>Available with polyester bags for use with aluminum oxide, at additional cost. Note: with 2-Fishmouth 2-4’ Pc Hose</p> <p>Shipping Weight: 5 lbs [2.3 Kg] </p> <p>Unit Dimensions: 15 1/4” wide x 11 1/2” deep x 3” high [38.7cm x 29.2cm x 7.6cm]</p>
$838.00
<h1>CAD/CAM Dust Collector - with New Hepa Filter</h1> <p></p> <p><br /> The latest innovation in dust collection for milling applications, especially suited for Zirconia and other milling materials. The 62-IICC is compact and lightweight. It includes a powerful vacuum suction motor; factory installed HEPA filter, charcoal filter, foot activation on/off switch and variable speed air flow control. The disposable HEPA filter has a volume capacity of approximately 182 cubic inches to mill hundreds of crowns before changing the bag. The HEPA filter is conveniently located in the front compartment for easy removal and disposal. Weighing in at only 35 pounds, the 62-IICC can be easily deployed, and is compatible with most bench top milling applications. Replacement disposable HEPA filter part number 62-IIDF</p> <p></p> <p></p>
$899.00

Dental Distributors Inc.

<div><p>Vented HVE Tips by Medicom.  White, 45deg angle for high suction.  50 per bag, 20 bags per box.  Price is per box (1000 tips).</p></div>
$27.99

KEYSTONE

<h2>Dispos-a-trap</h2> <p>The Dispos-a-trap combines convenience with economy for laboratories. These are safe, reliable and sanitary containers. The containers are translucent to allow for easy monitory of waste levels.</p> <p>Features:<br /> – Available Sizes: 3-1/2 gallon, 5 gallon sizes<br /> – Also Available Disposable Plaster Trap Hose Set</p>
$32.95

DENTAURUM Inc.

<p><h1>Filter Cassette For Suction Apparatus</h1><br /><p><h2> - Units: 1 piece</h2></p>Change filter cassette after approx. 50 hours of operation.</p>
$133.00

Supplier: Handler Manufacturing
Flexi-Hose -Specify 3" Or 4"Available in standard 3” [7.6cm] or 4” [10cm] diameter for use with dust..
$11.95

Supplier: Dental Distributors Inc.
Vented HVE Tips by Medicom.  White, 45deg angle for high suction.  50 per bag, 20 bags per box.  Pri..
$27.99

Supplier: KEYSTONE
Dispos-a-trap The Dispos-a-trap combines convenience with economy for laboratories. These are saf..
$32.95

Supplier: Handler Manufacturing
87210 Fishmouth This fishmouth is designed for use on the bench top. Supplied with a 5 1/2” x 3”..
$70.00

Supplier: Handler Manufacturing
For use on the bench top to assist in the collection of grinding and polishing debris while connecte..
$88.00

Supplier: Handler Manufacturing
Silencer A necessary accessory for the 60U Dust Collector, The 60 U/S silencer mounts on top of..
$109.95

Supplier: DENTAURUM Inc.
Filter Cassette For Suction Apparatus - Units: 1 pieceChange filter cassette after approx. 50 hours ..
$133.00

Supplier: Handler Manufacturing
550 Porta-Vac Bench Top Dust Collector A favorite of dental offices since its introduction several y..
$439.99

Supplier: Handler Manufacturing
62-II SUPER SUCKER: Designed to provide excellent suction to a single bench top work position. The 6..
$519.97

Supplier: Handler Manufacturing
Designed to provide maximum suction capacity, the No.62 Super Sucker develops 225 cfm (6.36M3/min) s..
$589.00

Supplier: Handler Manufacturing
Bench Top Dust Collector76D-0 Bench Top Dust Collector A bench top polishing unit designed to provid..
$599.00

Supplier: Handler Manufacturing
Super Sucker Designed to provide maximum suction capacity, the No.62 Super Sucker develops 225 CFM ..
$749.00

Supplier: Handler Manufacturing
A necessary accessory for the 60U Dust Collector, The 60 U/S silencer mounts on top of the 60U and l..
$838.00

Supplier: Handler Manufacturing
CAD/CAM Dust Collector - with New Hepa Filter The latest innovation in dust collection for milli..
$899.00