Categories

Lathes & Motors

Lathes & Motors

Lathes Motors

Since 1920, Red Wing motors have provided the precision and torque required by the dental and industrial trades. We are certain you will find Handler Red Wing motors the most durable product for your lab or dental office.

Click to see products by Suppliers


View All
Handler ManufacturingHandler Manufacturing
$369.00 - $1,299.00
Show:
Sort By:

Handler Manufacturing

<p>26 Red Wing Lathe A full 1/4 HP, 1725/3450 rpm two speed polishing lathe with 6” [15.2cm] shaft height (115 Volts/60Hz). Designed and built for use as a polishing lathe, its tapered shafts will accept standard dental tapered chucks. The 6” [15.2cm] shaft height of the 26 will allow the technician to utilize larger diameter buffing wheels for pumice and dry polishing operations.This unit may be supplied with 1/2” [1.3cm] straight shafts when specified.</p> <p>&nbsp;</p> <p>Available in 115 Volts/ 50Hz 26A, 220 Volts/50Hz 26E and 220 Volts/60Hz 26C at additional charge.</p> <p>NOTE: Specify No. 26S for motor with 1/2” [1.3cm] straight shafts.<br /> Shipping Wgt.: 41 lbs [18.6 Kg]<br /> Unit Dimensions.: 15 1/2” long x 8” wide x 9” high [39cm x 20cm x 23cm]</p>
$369.00
<h1>Red Wing Lathe, 1/4 Hp, 2 Speed, Hi Base</h1> <p>&nbsp;</p> <p>&nbsp;</p> <p>A full 1/4 HP, 1725/3450 rpm two-speed polishing lathe with 6” [15.2cm] shaft height. Designed and built for use as a polishing lathe, its tapered shaft will accept standard dental tapered chucks. Includes a left and right chuck remover for easy removal of chucks. The 6” [15.2cm] shaft height of the 26 will allow the technician to utilize larger diameter buffing wheels for pumice and dry polishing operations. The 26 is manufactured to provide years of durable service when used for polishing and grinding. 115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost.</p> <p>&nbsp;</p> <p>&nbsp;</p>
$389.00
<p>The 16 Chuk/Changer is factory installed to the right side of a 26A Low Base, Red Wing Lathe. This combination provides the technician with the ultimate in chuck changing efficiency at both low and high lathe speeds. The movement of the activating handle allows the technician to change from 1/4” [0.6cm] to 3/32” [0.2cm] burs, mandrels and chuck accessories without stopping the lathe. This combination will pay for itself in time saved, while providing excellent concentricity for accurate, professional result</p> <p><br /> All chuck and maintenance accessories included. 16B combination shipped on LOW BASE 26A lathe 4 1/2” shaft height unless otherwise specified.</p> <p>Shipping Wgt.: 45 lbs [20.4 Kg]<br /> Unit Dimensions:<br /> 18 3/4” long x 8” wide x 8 1/8” high [48cm x 20cm x 21cm] 16B-1 No. 16 Chuk Changer mounted on 26 high base lathe (16” shaft hgt).</p> <p></p>
$689.00
<p>The 16 Chuk/Changer is factory installed to the right side of a 26A High Base, Red Wing Lathe. This combination provides the technician with the ultimate in chuck changing efficiency at both low and high lathe speeds. The movement of the activating handle allows the technician to change from 1/4” [0.6cm] to 3/32” [0.2cm] burs, mandrels and chuck accessories without stopping the lathe. This combination will pay for itself in time saved, while providing excellent concentricity for accurate, professional resul</p> <p>&nbsp;</p> <p>Factory installed onto a No. 26 high base, Red Wing Lathe.<br /> Shipping Wgt.: 46 lbs [20.9 Kg]<br /> Unit Dimensions:<br /> 18 3/4” long x 8”wide x 9 1/8” high[48cm x 20cm x 23cm]</p>
$789.00
<h1>Chuk/Changer On 28L</h1> <p>&nbsp;</p> <p>&nbsp;</p> <p>A combination of a 28L 1/3 HP two speed polishing motor and a Handler Chuk/Changer. The addition of a higher torque motor with a Chuk/Changer will provide the technician with years of chuck changing efficiency. The 16SB will save time while assuring accuracy for the technician who frequently interchanges 3/32” and 1/2” diameter burs, mandrels and chuck accessories. Shipped complete in 115 Volts/60Hz.</p> <p>&nbsp;</p> <p>&nbsp;</p>
$809.00
<h1>Chuk/Changer On 28H</h1> <p>&nbsp;</p> <p>&nbsp;</p> <p>A Chuk/Changer in combination with a high base 1/3 HP two speed polishing motor No. 28. The 16SB-1 will allow the technician to utilize larger diameter buffs and abrasives, while obtaining the accuracy and speed of interchanging both 3/32” [2.3 mm] and 1/2” [6.6 mm] burs, mandrels and chuck accessories while the lathe is in motion. Shipped complete in 115 Volts/60Hz. Available in 115 Volts/50Hz, 220 Volts/50Hz and 230 Volts/60Hz at additional charge.</p> <p>&nbsp;</p> <p>&nbsp;</p>
$829.00
<h1>ACCELA/ROTOR HIGH SPEED GRINDER &amp; POLISHER</h1> <p>&nbsp;</p> <p>&nbsp;</p> <p>The 16C Accela/Rotor is a combination of the Handler Accela/Rotor attachment 16D and No. 26A Red Wing Lathe.The Accela/Rotor attachment converts the right side of the lathe from standard lathe speeds of 1725/3450 rpm to 12,000 and 24,000 rpm for use in finishing non-precious alloys and chrome-cobalt alloys. The 16C is shipped complete with a Red Wing Lathe, Accela/Rotor with movable light and protective shield, high speed spindle, adjusting levers and necessary guards. The high speed spindle incorporates an activating handle which opens and closes the 3/32” [2.4mm] collets for ease of changing burs and mandrels while the motor is running.</p> <p>&nbsp;</p> <p>&nbsp;</p>
$1,299.00

Supplier: Handler Manufacturing
26 Red Wing Lathe A full 1/4 HP, 1725/3450 rpm two speed polishing lathe with 6” [15.2cm] shaft he..
$369.00

Supplier: Handler Manufacturing
Red Wing Lathe, 1/4 Hp, 2 Speed, Hi Base     A full 1/4 HP, 1725/3450 rpm two-speed pol..
$389.00

Supplier: Handler Manufacturing
The 16 Chuk/Changer is factory installed to the right side of a 26A Low Base, Red Wing Lathe. This c..
$689.00

Supplier: Handler Manufacturing
The 16 Chuk/Changer is factory installed to the right side of a 26A High Base, Red Wing Lathe. This ..
$789.00

Supplier: Handler Manufacturing
Chuk/Changer On 28L     A combination of a 28L 1/3 HP two speed polishing motor and a H..
$809.00

Supplier: Handler Manufacturing
Chuk/Changer On 28H     A Chuk/Changer in combination with a high base 1/3 HP two speed..
$829.00

Supplier: Handler Manufacturing
ACCELA/ROTOR HIGH SPEED GRINDER & POLISHER     The 16C Accela/Rotor is a combinatio..
$1,299.00