| Load up the cart! $9.99 flat shipping. |
Your shopping cart is empty!
-250x250.jpg)
Ray Foster Dental Equipment
KEYSTONE 
Handler Manufacturing
ACME DENTAL
<h1>K.O. Disc 12/Set</h1>
<p> </p>
<p> </p>
<p>Disc for 44 UPPER, LOWER, and Atlas GIANT Flasks. Also fits Varsity Flasks. 22D KO Discs available on special request for older 22C Handler Flasks.</p>
<p> </p>
<p> </p>
$22.95
<h1>De-Flasking Disc</h1>
<p> </p>
<p> </p>
<p>An aid designed to help locate denture teeth in a flask processed denture.The disc will help protect teeth during the deflasking procedure. Made of aluminum, the 47D can be used over and over again. For use in conventional type flasks.</p>
<p> </p>
<p> </p>
$29.95
<h1>Spring Filler</h1>
<p> </p>
<p> </p>
<p>A bronze filler which provides flasked cases with compensatory spring action with the aid of two stainless steel springs. Used in Handler presses to provide compensatory spring action during curing of flasked dentures.</p>
<p> </p>
<p> </p>
$69.95
<h1>Lower Flask - All Forged Brass With Stainless Steel Guide Pins</h1>
<p> </p>
<p> </p>
<p>This LOWER Flask is forged of special alloy bronze to provide years of durable service, with a slanted heel section to accommodate cases with high condyles. Its tapered rear guide pins, smooth interior and special bronze alloy provide ease of fuction during flasking and de-flasking operations.</p>
<p> </p>
<p> </p>
<p> </p>
$99.00
<h1>Upper Flask - All Forged Brass With Stainless Steel Guide Pins</h1>
<p> </p>
<p> </p>
<p>This UPPER Flask is forged of special alloy bronze to provide years of durable service. Fitted with hardened stainless steel alloy rear tapered guide pins, this ejector type flask has long been a favorite of leading Prosthodontists, dental schools and commercial laboratories. Dropped forged with glass-like smooth surfaces, models are easily ejected with the aid of the bottom ejection disc.</p>
<p> </p>
<p> </p>
$99.00
<h1>K.O. Ejector (For 22C)</h1>
<p> </p>
<p> </p>
<p>Designed for use in ejecting poured models from 22C Denture flasks, ONLY. Use in conjunction with any Handler Flask Press, the #47 easily ejects models from 22C flasks through smooth mechanical downward action.</p>
<p> </p>
<p> </p>
$129.00
<h1>Little Giant</h1>
<p> </p>
<p> </p>
<p>A Flask Press manufactured for pressing a single flask. Constructed of malleable/ductile iron, the Little Giant will provide years of trouble free service under normal pressing procedures.</p>
<p> </p>
<p> </p>
$159.00
<h1>Atlas Flask Ejector</h1>
<p> </p>
<p> </p>
<p>Designed to easily eject poured models from No. 44 Atlas flasks with smooth mechanical action. Spring loaded side levers adjust to Upper or Lower Flask configuration with a quick movement of an indicating lever. Initial insertion separates mid and lower flask sections; final insertion separates model from mid section.</p>
<p> </p>
<p> </p>
$169.00
<h1>Bridge Flask</h1>
<p> </p>
<p> </p>
<p>Constructed of cast manganese bronze, this four piece C & B Flask is built for the perfectionist’s use in making processed, temporary splints. Harder stainless steel tapered pins provide for the precise alignment of the four sections. Its durable construction affords excellent resistance to warpage and distortion during pressing and processing operations. Use with 61A one flask compress.</p>
<p> </p>
<p> </p>
$179.00
<h> Big Boy Flask Press- 1 Flask<br />
<br />
<br />
<p>A Heavy Duty Single Flask Press manufactured of malleable/ductile cast iron for durability and long wear, with alloy steel shaft, grey iron handle and malleable/ductile iron pressure plate. Holes in frame allow for easy bench mounting, or 38A Clamps may be utilized for easy bench mounting and/or removal. Big Boy Flask presses are designed for the busy laboratory.</p>
</h>
$199.00
<h1>Two Flask Compress</h1>
<p> </p>
<p> </p>
<p>Our most popular denture compress is built to hold two conventional flasks for simultaneous curing. Sturdily built of bronze alloy, its rustproof cast body will provide years of service.Two stainless steel springs give equalized compensatory pressure during curing operation. A suitable allen wrench, wood capped holding handle and brass lifting handle are supplied with each compress. Flasks not included.</p>
<p> </p>
<p> </p>
$209.00
<h1>Big Boy Flask Press- 2 Flask</h1>
<p> </p>
<p> </p>
<p>A Heavy Duty Two Flask Press manufactured of malleable/ductile cast iron. With alloy steel shaft, grey iron handle and malleable/ductile iron pressure plate. Holes in frame allow for easy bench mounting, or 38A Clamps may be utilized for easy bench mounting and/or removal.</p>
<p> </p>
<p> </p>
$229.00
