| Load up the cart! $9.99 flat shipping. |
Your shopping cart is empty!
-250x250.jpg)
Prestige Dental
3D DENTAL
DENTAURUM Inc.
Reliance Orthodontic Products
KEYSTONE 
<div>
<p>Pressure Indicating Paste (PIP) is a pure white silicone paste, used for seating crowns, bridges and full, immediate and partial dentures. The brief procedure yields specific results that are easy to read and thoroughly reliable, surpassing results obtained with chemical set pressure indicating materials used to locate areas of denture discomfort. PIP is applied to the dry denture; companion PIP spray is applied to the tissue. The denture is then seated under pressure then removed. Areas where the paste has been displaced show points of excessive pressure.</p>
<p><strong>Available items:</strong><br />
– 1 oz. Tube<br />
– 1 1/4 oz. Pip Jar W/Remover<br />
– 2 1/4 oz Pip Jar W/Remover<br />
– 4 oz Pip Pump – Pip Jar 8 oz<br />
– Pip Brushes 12/Pk<br />
– Pip Packet W/Remover & Brush 24/Box<br />
– 1 oz. Pip Remover<br />
– 4 oz. Pip Remover</p>
</div>
$3.85
<h2>Hatho ThermoPol Set</h2><p>Less work for better results is what the new Hatho ThermoPol Set is built upon. It’s revolutionary design and working technique will brighten not just acrylics in faster-than-ever times, but also thermoplastics such as Valplast® and TCS®. That being said, this all-in-one kit is the only of its kind on the market, and will take your denture polishing work to a whole new level.</p><p>Included in this kit is everything you need to make your appliances shine as quickly and bright as possible, in a very fast and simple process. Our Hatho ThermoPol Set comes with the following:</p><p>• Multi Layer Brush<br />
• Polistar Lintygrey Compound (90g)<br />
• COSIMA Soft Buff<br />
• MIRA Polishing Buff<br />
• Polistar Cream (90g)<br />
• Polistar Pro Pink (150g)<br />
• AlphaCard Pocket Card</p><p>A combination of the Hatho Multi Layer Brush and Polistar Lintygrey Compound is comparable to no two other products for the pre-polishing process. The Multi Layer Brush is equipped with specially selected cloth or fiber in a design that retains the Compound on the brush, leaving you with an evenly polished thermoplastic after three minutes. Thanks to the high-concentration polishing abrasives found in Polistar Cream and Pro Pink that are used on the COSIMA and MIRA buffs, the sparkle and shine on the appliance will be brighter than ever before.</p><p>When this three step polishing process is completed, the evident improvement of the denture surface will benefit the result of a happy polisher and patient.</p></div>
$5.85
<div>
<p>Tripoli Polishing Compound is great for removing scratches and preparation of denture materials. Also works well on metals prior to final polishing. Brown color, available in 2 1/2-pound bar.</p>
</div>
$5.85
<div>
<p>White Diamond Polishing Compound is a clean, dry, fast pre-polish on plastics. Grey-white color, available in 1-pound bar.</p>
</div>
$6.25
<div><p>The Bobbing Compound provides fast cutting action on metals. It’s also called jewelers polish. Tan color, 1-pound bar.</p></div><div><div><p>The Bobbing Compound provides fast cutting action on metals. It’s also called jewelers polish. Tan color, 1-pound bar.</p></div>
$6.75
<h2>Hatho ThermoPol Set</h2><p>Less work for better results is what the new Hatho ThermoPol Set is built upon. It’s revolutionary design and working technique will brighten not just acrylics in faster-than-ever times, but also thermoplastics such as Valplast® and TCS®. That being said, this all-in-one kit is the only of its kind on the market, and will take your denture polishing work to a whole new level.</p><p>Included in this kit is everything you need to make your appliances shine as quickly and bright as possible, in a very fast and simple process. Our Hatho ThermoPol Set comes with the following:</p><p>• Multi Layer Brush<br />
• Polistar Lintygrey Compound (90g)<br />
• COSIMA Soft Buff<br />
• MIRA Polishing Buff<br />
• Polistar Cream (90g)<br />
• Polistar Pro Pink (150g)<br />
• AlphaCard Pocket Card</p><p>A combination of the Hatho Multi Layer Brush and Polistar Lintygrey Compound is comparable to no two other products for the pre-polishing process. The Multi Layer Brush is equipped with specially selected cloth or fiber in a design that retains the Compound on the brush, leaving you with an evenly polished thermoplastic after three minutes. Thanks to the high-concentration polishing abrasives found in Polistar Cream and Pro Pink that are used on the COSIMA and MIRA buffs, the sparkle and shine on the appliance will be brighter than ever before.</p><p>When this three step polishing process is completed, the evident improvement of the denture surface will benefit the result of a happy polisher and patient.</p></div>
$9.45
<div>
<p>The Composite Polishing Bar produces a high shine on composite restorations. White color, 1-pound bar.</p>
</div>
<div>
<p> </p>
</div>
$9.85
<div>
<p>Red Rouge Polishing Compound is for high shine on gold, precious and non-precious alloys. Great for the final polish on gold. Available in 1-pound bars.</p>
</div>
$10.35
<div>
<p>Pressure Indicating Paste (PIP) is a pure white silicone paste, used for seating crowns, bridges and full, immediate and partial dentures. The brief procedure yields specific results that are easy to read and thoroughly reliable, surpassing results obtained with chemical set pressure indicating materials used to locate areas of denture discomfort. PIP is applied to the dry denture; companion PIP spray is applied to the tissue. The denture is then seated under pressure then removed. Areas where the paste has been displaced show points of excessive pressure.</p>
<p><strong>Available items:</strong><br />
– 1 oz. Tube<br />
– 1 1/4 oz. Pip Jar W/Remover<br />
– 2 1/4 oz Pip Jar W/Remover<br />
– 4 oz Pip Pump – Pip Jar 8 oz<br />
– Pip Brushes 12/Pk<br />
– Pip Packet W/Remover & Brush 24/Box<br />
– 1 oz. Pip Remover<br />
– 4 oz. Pip Remover</p>
</div>
$10.50
<div>
<p>Pressure Indicating Paste (PIP) is a pure white silicone paste, used for seating crowns, bridges and full, immediate and partial dentures. The brief procedure yields specific results that are easy to read and thoroughly reliable, surpassing results obtained with chemical set pressure indicating materials used to locate areas of denture discomfort. PIP is applied to the dry denture; companion PIP spray is applied to the tissue. The denture is then seated under pressure then removed. Areas where the paste has been displaced show points of excessive pressure.</p>
<p><strong>Available items:</strong><br />
– 1 oz. Tube<br />
– 1 1/4 oz. Pip Jar W/Remover<br />
– 2 1/4 oz Pip Jar W/Remover<br />
– 4 oz Pip Pump – Pip Jar 8 oz<br />
– Pip Brushes 12/Pk<br />
– Pip Packet W/Remover & Brush 24/Box<br />
– 1 oz. Pip Remover<br />
– 4 oz. Pip Remover</p>
</div>
$10.75
<h2>Hatho ThermoPol Set</h2><p>Less work for better results is what the new Hatho ThermoPol Set is built upon. It’s revolutionary design and working technique will brighten not just acrylics in faster-than-ever times, but also thermoplastics such as Valplast® and TCS®. That being said, this all-in-one kit is the only of its kind on the market, and will take your denture polishing work to a whole new level.</p><p>Included in this kit is everything you need to make your appliances shine as quickly and bright as possible, in a very fast and simple process. Our Hatho ThermoPol Set comes with the following:</p><p>• Multi Layer Brush<br />
• Polistar Lintygrey Compound (90g)<br />
• COSIMA Soft Buff<br />
• MIRA Polishing Buff<br />
• Polistar Cream (90g)<br />
• Polistar Pro Pink (150g)<br />
• AlphaCard Pocket Card</p><p>A combination of the Hatho Multi Layer Brush and Polistar Lintygrey Compound is comparable to no two other products for the pre-polishing process. The Multi Layer Brush is equipped with specially selected cloth or fiber in a design that retains the Compound on the brush, leaving you with an evenly polished thermoplastic after three minutes. Thanks to the high-concentration polishing abrasives found in Polistar Cream and Pro Pink that are used on the COSIMA and MIRA buffs, the sparkle and shine on the appliance will be brighter than ever before.</p><p>When this three step polishing process is completed, the evident improvement of the denture surface will benefit the result of a happy polisher and patient.</p></div>
$11.40
<div>
<p>This Yellow High Shine Polishing Compound is for exceptional high gloss on denture materials.</p>
</div>
$11.65
<div>
<p>Shure-Shine Plate Polish is our bestselling polish for acrylic denture materials. Tan color, available in 2 1/2-pound bar (approximately).</p>
</div>
$13.60
<h2>Hatho Polishing Compounds</h2><p>We offer various Hatho Polishing Compounds for various needs in the laboratory or clinic setting. We offer the following Hatho Polishing Pastes:</p><p>Brown – Designed for pre-polishing of precious metals. Use with lathe brushes, TORO miniature brushes, GEZA and Poly-Buffs. Ideal for polishing deep scratches, pre-polishing of crown and bridge work.</p><p>Green – Designed for high shine polishing of precious metals and chrome cobalt framework. A very fine compound used for final polish. Use with muslin, chamois, micro-fiber leather or flannel buffs. Initial surface must be prepared with a pre-polish.</p><p>Blue – Designed for high shine polishing of precious/non-precious metals and light curing composites. It’s a universal compound for high shine polish. Special high grade abrasives inside, similar to diamonds. Use with muslin, chamois, micro-fiber leather or flannel buffs.</p><p>Beige – Designed for high shine polishing of acrylics and polymer based crowns and bridges. Initial surface must be prepared with a pre-polish pumice. Use with muslin, chamois, micro-fiber, leather flannel, or felt buffs.</p><p>Red – Designed for high shine polishing of gold alloys. The least abrasive Hatho polishing compound. Initial surface must be prepared with a pre-polish. Use as a final polish for gold alloys. Use with muslin, chamois, micro-fiber leather or flannel buffs.</p><p>Diamond Polish – Designed for high shine polishing of precious and non-precious metals, titanium, acrylics, composites and ceramics. It’s the fastest and most efficient method to polish every dental material. Initial surface must be prepared with a pre-polish. Use with miniature brushes combined with polishing disks, Geza and Toro brushes or muslin, chamois, micro-fiber leather, flannel and felt buffs.</p></div>
$14.55
