Register Login
Categories

3D Printers

3D Printers

Click to see products by Suppliers

Ortho Insight 3D

Ortho Insight 3D


$3,995.00 - $12,995.00

Ultimate 3D Printing Store

Ultimate 3D Printing Store


$19.95 - $2,399.00

Loading ...
Sort By:
Show:

Ultimate 3D Printing Store

<p>Phrozen Cure - UV Post-Curing Lamp V2</p><p><strong>Features -</strong></p><ul> <li>Great Inner Capacity: 17.5 x 14 x 18.5 cm inner capacity, which fits build volume for Phrozen 5.5" Printers</li> <li>Fast Curing by UV-LEDs: 365nm, 385nm, 405nm UV-LEDs (W in total) to cure inner, middle, and outer layers, respectively</li> <li>360 Degree All-Around Curing: The plate will rotate 360 degree and makes models cured all-around without any blind spots</li> <li>Stable Power Supply &amp; System Cooling: Stable power supply and makes no surge. Dual-fans cooling also makes system stable for long-term use</li> <li>Easy Operation: Phrozen Cure comes with digital control system. One-click finishes all setup - Safety Interlock Design: Cure lamp with safety interlock design. Applicable for 100-240V 50-60Hz full voltage</li> </ul><p><strong>Specification</strong></p><ul> <li>LED Specification: 365nm, 385nm, and 405nm. W in Total.</li> <li>Voltage: 100-240V 50-60Hz</li> </ul>
$449.00
<p>Extra Aluminum Vat With FEP Pre Installed - Phrozen Shuffle XL</p><p>Factory OEM replacement VAT for Phrozen Shuffle XL (*NOT FOR STANDARD SHUFFLE*). This vat comes with preinstalled FEP Film and additional vat rubber cover. This is an excellent choice for power users that use multiple types of resin and desire fast change over.</p><p><strong>Compatible with:</strong> -</p><ul> <li>Phrozen Shuffle XL 2018</li> <li>Phrozen Shuffle XL 2019</li> <li>Phrozen Sonic XL 4K</li> <li>Phrozen Shuffle XL</li> <li>Lite Not compatible with any other Phrozen printer</li> </ul>
$119.95
<p>Phrozen 8.9" Building Platform</p><p>Factory OEM replacement machined aluminum build platform for Phrozen Shuffle, (*NOT FOR STANDARD SHUFFLE*) excellent to have an extra on hand if curing your models while still attached, quick change over. *Highly recommended to re-level between platform changes*</p><p><strong>Compatible with: -</strong></p><ul> <li>Regular Phrozen Shuffle XL (2018)</li> <li>Phrozen Shuffle XL 2019</li> <li>Phrozen Sonic XL 4K</li> <li>Phrozen Shuffle XL Lite</li> <li>*NOT compatible with any other Phrozen printers*</li> </ul>
$115.95
<p><strong>Phrozen A4 FEP Film</strong></p><p>Factory OEM<br /> Phrozen A4 FEP Film, 1 Piece<br /> Transparent FEP film for Phrozen.<br /> Size: A4 (210mm x 297mm) Spec: 150um<br /> Weight: 10g<br /> <strong>Compatible with: -</strong></p><ul> <li>​Phrozen Make</li> <li>Phrozen Make XL</li> <li>Phrozen Shuffle Lite</li> <li>Phrozen Shuffle</li> <li>Phrozen Shuffle XL</li> <li>Phrozen Shuffle XL 2019</li> <li>Phrozen Shuffle 4K</li> <li>Phrozen Sonic</li> <li>Phrozen Sonic XL 4K</li> <li>Phrozen Sonic Mini</li> </ul>
$19.95
<p>Phrozen ABS-Like Resin: Matte Gray (500ml)</p><p>Phrozen ABS-Like Gray is a great resin for highly detailed prints. The matte light gray color is perfect for viewing, post processing and painting. Perfect, easy-to-use resin for Phrozen Transform.</p><p>Specifications Volume: 5KG Container XY Planar Resolution: 50 micron Z Resolution (Layer Height): 30-100 micron Property: High hardness, toughness and resolution. Way to Rinse:Clean with alcohol spray with air gun Suitable for: LCD 3D Printer Application: General modeling &amp; prototyping Viscosity: 67 cps Density: 1.10 g / cm3 Tg: 70 degree Celsius Break value: 10 MPa Tensile Modulus: 1050 MPa Hardness: Shore 76D Elongation: 3 % I-Zod Impact: 1.44 KJ/m2</p><p>Operating Instructions We suggest using resin and printer indoors under well-ventilated conditions. Avoid exposure to sunlight and indoor luminescence. Please preserve our resin in closed opaque bottle to avoid exposure to air. Do not mix used and non-used resin together. Please keep the resin away from kids. Do not dump resin. Please cure resin and treat/recycle it as general plastics garbage.</p><p>Safety Do not eat or swallow the resin. Go to hospital if necessary. Wear goggles to avoid eye contact with resin. Wash your eyes with water and go to hospital if necessary. Resin might cause slight irritation to skin. Wear gloves when handling. Stop using if an allergic reaction occurs. Resin has a slight odor. We strongly suggest you use it under ventilated conditions. Suggested safety equipment: gloves, mask, goggles, and lab coat. Keep resin in room temperature (15 – 35 OC) and dry condition.</p>
$49.95
<h1>Phrozen Sonic XL 4K</h1><p><img alt="" src="https://www.dentazone.com/image/data/products/Ultimate-3D/original_d0152366-fd2b-4102-a509-6219ab9a50e9.jpg" /></p>
$2,399.00
Replacement LCD Panel - Regular Phrozen Shuffle<p> Compatible with Regular Phrozen Shuffle <p> Not Compatible with Phrozen Shuffle 2019 Phrozen Shuffle – 2K Factory OEM LCD Screen Replacement.
$84.95
<p>Replacement LCD Screen Panel/Module - Phrozen Shuffle XL 2019</p><p>Factory OEM<br /> <strong>Compatible with: -</strong></p><ul> <li>Phrozen Shuffle XL 2019</li> <li>Phrozen Shuffle XL</li> <li>*NOT compatible with any other Phrozen printer 8.9"</li> <li>Replacement LCD Screen Panel/Module</li> </ul>
$119.95
<p>Resin Print Removal Tool Set</p><p>Factory OEM</p><p>These high quality stainless steel and wood tools are perfect for Removing highly detailed resin prints from any SLA/LCD/DLP/Laser Build surface. Ultra thin and flexible ensures easy removal with no Damaging of the print during the removal process</p>
$19.95

Ortho Insight 3D

<h1>i70 3D Printer</h1><p>&nbsp;</p><p>iPrint 3D High-speed high-resolution 3D printing optimized for the orthodontic office! Orthodontists can start patients on the first appointment! The iPrint 3D® Printer from Ortho Insight 3D™ enables accurate, economical, and quick 3D printing of transfer trays and Other orthodontic appliances. Orthodontists can use this 3D printer in their own offices as per their schedules, thus reducing the costs and time delays as compared to contracting a lab for 3D printing.</p><p>Results are extremely accurate, high resolution, and fast.</p><p>STL files for printing models at user-selectable layer thicknesses of 25, 50, or 100 microns.</p><p>The iPrint 3D® printer is SLA-based, using a laser to cure the printing material in a build area of 7 x 7 x 8 inches.</p><p>The iPrint 3D® printer can print approximately 15mm per hour vertically (in Z-axis) or more in some circumstances.</p><p>SLA technology and no print heads to replace mean much less wasted print material.</p><p>Use only the resin that is needed for each job and the rest can be stored for later.</p><p>Low-maintenance equipment and cost-effective pricing provide more for the money with iPrint 3D® printers compared to competitors’ brands.</p><p>STL files exported from Ortho Insight 3D™ software, the orthodontists have tools for a complete solution in their own offices.</p><p>Orthodontists can create treatment plans that use transfer trays for indirect bonding, aligners for tooth movement, and other appliances including surgical drill guides and surgical splints.</p><p><strong>Following benefits are offered by this high-resolution printer:</strong></p><ul> <li>Print multiple sets of multiple patient models in one printing.</li> <li>Lower cost for supplies (printing material)</li> <li>Much lower cost of maintenance</li> <li>Bio-compatible printing material.</li> <li>Models for clear aligner movement appliances</li> <li>Indirect bonding transfer trays</li> <li>Indirect bonding transfer trays</li> <li>Models for invisible retainers</li> </ul><h2>System Requirements</h2><p><strong><img alt="" src="https://dentazone.com/image/data/products/Motionview3d/system_requirements_motionview.png" style="width: 1156px; height: 763px;" /><img alt="" src="http://dentazone.com/image/data/products/Motionview3d/MotionView%20System.jpg" style="width: 739px; height: 496px;" /> </strong></p>
$3,995.00
<h1><strong>iPrint 700 3D Printer</strong></h1><p>&nbsp;</p><p>iPrint 3D High-speed high-resolution 3D printing optimized for the orthodontic office! Orthodontists can start patients on the first appointment! The iPrint 3D® Printer from Ortho Insight 3D™ enables accurate, economical, and quick 3D printing of transfer trays and Other orthodontic appliances. Orthodontists can use this 3D printer in their own offices as per their schedules, thus reducing the costs and time delays as compared to contracting a lab for 3D printing.</p><p>Results are extremely accurate, high resolution, and fast.</p><p>STL files for printing models at user-selectable layer thicknesses of 25, 50, or 100 microns.</p><p>The iPrint 3D® printer is SLA-based, using a laser to cure the printing material in a build area of 7 x 7 x 8 inches.</p><p>The iPrint 3D® printer can print approximately 15mm per hour vertically (in Z-axis) or more in some circumstances.</p><p>SLA technology and no print heads to replace mean much less wasted print material.</p><p>Use only the resin that is needed for each job and the rest can be stored for later.</p><p>Low-maintenance equipment and cost-effective pricing provide more for the money with iPrint 3D® printers compared to competitors’ brands.</p><p>STL files exported from Ortho Insight 3D™ software, the orthodontists have tools for a complete solution in their own offices.</p><p>Orthodontists can create treatment plans that use transfer trays for indirect bonding, aligners for tooth movement, and other appliances including surgical drill guides and surgical splints.</p><p><strong>Following benefits are offered by this high-resolution printer:</strong></p><ul> <li>Print multiple sets of multiple patient models in one printing.</li> <li>Lower cost for supplies (printing material)</li> <li>Much lower cost of maintenance</li> <li>Bio-compatible printing material.</li> <li>Models for clear aligner movement appliances</li> <li>Indirect bonding transfer trays</li> <li>Indirect bonding transfer trays</li> <li>Models for invisible retainers</li> </ul><h2>System Requirements</h2><p><strong><img alt="" src="https://dentazone.com/image/data/products/Motionview3d/system_requirements_motionview.png" style="width: 1156px; height: 763px;" /><img alt="" src="http://dentazone.com/image/data/products/Motionview3d/MotionView%20System.jpg" style="width: 739px; height: 496px;" /> </strong></p>
$12,995.00

Supplier: Ultimate 3D Printing Store
Phrozen Cure - UV Post-Curing Lamp V2Features -Great Inner Capacity: 17.5 x 14 x 18.5 cm ..
$449.00

Supplier: Ultimate 3D Printing Store
Extra Aluminum Vat With FEP Pre Installed - Phrozen Shuffle XLFactory OEM replacement VAT for Ph..
$119.95

Supplier: Ortho Insight 3D
i70 3D Printer iPrint 3D High-speed high-resolution 3D printing optimized for the orthodont..
$3,995.00

Supplier: Ortho Insight 3D
iPrint 700 3D Printer iPrint 3D High-speed high-resolution 3D printing optimized for the or..
$12,995.00

Supplier: Ultimate 3D Printing Store
Phrozen 8.9" Building PlatformFactory OEM replacement machined aluminum build platform for Phroz..
$115.95

Supplier: Ultimate 3D Printing Store
Phrozen A4 FEP FilmFactory OEM Phrozen A4 FEP Film, 1 Piece Transparent FEP film for Phrozen. ..
$19.95

Supplier: Ultimate 3D Printing Store
Phrozen ABS-Like Resin: Matte Gray (500ml)Phrozen ABS-Like Gray is a great resin for highly deta..
$49.95

Supplier: Ultimate 3D Printing Store
Replacement LCD Panel - Regular Phrozen ShuffleCompatible with Regular Phrozen Shuffle No..
$84.95

Supplier: Ultimate 3D Printing Store
Replacement LCD Screen Panel/Module - Phrozen Shuffle XL 2019Factory OEM Compatible with: -..
$119.95

Supplier: Ultimate 3D Printing Store
Resin Print Removal Tool SetFactory OEMThese high quality stainless steel and wood tools are..
$19.95
logo_aao

AAO endorses Orthazone's ecommerce supplies platform. Orthazone pays royalty fees to the AAO. These fees are used for the general purposes of the AAO. The AAO does not certify, guarantee, or warrant the products, services, or offerings provided Orthazone, its platform or its employees, agents, subcontractors, or vendor. The AAO will not be liable for any indirect, special, incidental, or consequential loss or damage of any kind, including lost profits (whether or not the parties have been advised of such loss or damage) arising in any way in connection with the products and services offered by Orthazone.