Model Trimmers

<h2>10" Model Trimmer</h2> <p>Ray Foster Model Trimmers are constructed from heavy gauge cast aluminum with stainless steel and solid brass fittings. The machines are finished, inside and out, with a high gloss white epoxy coating that offers durability, corrosion resistance, and a very attractive finish. Resiliently mounted and precision balanced for smooth, quiet operation, they are designed to assure years of service free performance under the most demanding laboratory use. The Ray Foster Model Trimmers are the original "swinging door" trimmer and is the benchmark by which other model trimmers are measured.</p> <h4>Model MT10</h4> <p>The MT10 offers all the features of the MT12 in a compact design. It is the ideal fit in the close quarters of a doctor's office laboratory, and also performs very well in the demanding environment of a commercial laboratory.</p> <h5>Specifications</h5> <ul> <li>1/3 HP motor, with 1.35 service factor producing .45 HP actual power</li> <li>10" diameter, 1/4" thick grinding wheel</li> <li>4" wide, 4-1/4" high cutting surface</li> <li>14" high, 14" wide, 15" deep</li> <li>115 volt, 60 Hz standard or 230 volt, 50/60 Hz optional for export</li> <li>Net weight 32 lbs, shipping weight 38 lbs</li> </ul>

<p>Produce high quality, precise models without water.</p> <p>Ray Foster Dry Model Trimmer, together with Ray Foster Cyclone Dust Collector, is a completely self-contained model trimming system. It can be placed in any space available location, as there is no need to connect to your water supply and it does not require a drain.</p> <h4>Model MTD1<br /> Dry Model Trimmer</h4> <h5>Features</h5> <ul> <li><span>Rigid cutting surface gives a flat, smooth finish</span></li> <li>Simplified mechanics (no pulleys or belts) results in a smooth running, quiet machine</li> <li>Power output connection for automatic on/off of dust collector</li> <li>Uses fast cutting 10” diameter PSA abrasive discs</li> <li>Heavy-duty, capacitor-start, 1/3 HP motor</li> <li>Adjustable work table</li> <li>Six foot vacuum hose and three additional abrasive discs included</li> <li>Proven Ray Foster quality and durability</li> </ul> <h5>Specifications</h5> <ul> <li>14” high, 14” wide, 15” deep</li> <li>115 volt, 60 Hz standard</li> <li>230 volt, 50/60 Hz optional for export</li> <li>Wheel size 10” diameter</li> <li>1-1/2” O.D. suction connection</li> <li>Net weight 35 lbs, shipping weight 40 lbs</li> </ul>

<div> <h2>12" Model Trimmer</h2> <p>Ray Foster Model Trimmers are constructed from heavy gauge cast aluminum with stainless steel and solid brass fittings. The machines are finished, inside and out, with a high gloss white epoxy coating that offers durability, corrosion resistance, and a very attractive finish. Resiliently mounted and precision balanced for smooth, quiet operation, they are designed to assure years of service free performance under the most demanding laboratory use. The Ray Foster Model Trimmers are the original "swinging door" trimmer and is the benchmark by which other model trimmers are measured.</p> <h5>Model MT12</h5> <ul> <li>Heavy-duty, capacitor start ball bearing motor</li> <li>Adjustable work table – Full radius water spray</li> <li>Reversible grinding wheel – Hinged door secured by single knob</li> <li>Optional automatic water valve – Motor is UL recognized and CSA certified for electrical safety</li> </ul> <h5>Specifications</h5> <ul> <li>1/2 HP motor, with 1.25 service factor producing .625 HP actual power</li> <li>12" diameter, 1/4" thick grinding wheel</li> <li>5-1/4" wide, 5" high cutting surface</li> <li>17" high, 17" wide, 16" deep</li> <li>115 volt, 60 Hz standard or 230 volt, 50/60 Hz optional for export</li> <li>Net weight 41 lbs, shipping weight 49 lbs</li> </ul> </div>

<h2>10" Model Trimmer</h2> <p>Ray Foster Model Trimmers are constructed from heavy gauge cast aluminum with stainless steel and solid brass fittings. The machines are finished, inside and out, with a high gloss white epoxy coating that offers durability, corrosion resistance, and a very attractive finish. Resiliently mounted and precision balanced for smooth, quiet operation, they are designed to assure years of service free performance under the most demanding laboratory use. The Ray Foster Model Trimmers are the original "swinging door" trimmer and is the benchmark by which other model trimmers are measured.</p> <h4>Model MT10</h4> <p>The MT10 offers all the features of the MT12 in a compact design. It is the ideal fit in the close quarters of a doctor's office laboratory, and also performs very well in the demanding environment of a commercial laboratory.</p> <h5>Specifications</h5> <ul> <li>1/3 HP motor, with 1.35 service factor producing .45 HP actual power</li> <li>10" diameter, 1/4" thick grinding wheel</li> <li>4" wide, 4-1/4" high cutting surface</li> <li>14" high, 14" wide, 15" deep</li> <li>115 volt, 60 Hz standard or 230 volt, 50/60 Hz optional for export</li> <li>Net weight 32 lbs, shipping weight 38 lbs</li> </ul>

<div> <h2>12" Model Trimmer</h2> <p>Ray Foster Model Trimmers are constructed from heavy gauge cast aluminum with stainless steel and solid brass fittings. The machines are finished, inside and out, with a high gloss white epoxy coating that offers durability, corrosion resistance, and a very attractive finish. Resiliently mounted and precision balanced for smooth, quiet operation, they are designed to assure years of service free performance under the most demanding laboratory use. The Ray Foster Model Trimmers are the original "swinging door" trimmer and is the benchmark by which other model trimmers are measured.</p> <h5>Model MT12</h5> <ul> <li>Heavy-duty, capacitor start ball bearing motor</li> <li>Adjustable work table – Full radius water spray</li> <li>Reversible grinding wheel – Hinged door secured by single knob</li> <li>Optional automatic water valve – Motor is UL recognized and CSA certified for electrical safety</li> </ul> <h5>Specifications</h5> <ul> <li>1/2 HP motor, with 1.25 service factor producing .625 HP actual power</li> <li>12" diameter, 1/4" thick grinding wheel</li> <li>5-1/4" wide, 5" high cutting surface</li> <li>17" high, 17" wide, 16" deep</li> <li>115 volt, 60 Hz standard or 230 volt, 50/60 Hz optional for export</li> <li>Net weight 41 lbs, shipping weight 49 lbs</li> </ul> </div>

<p>Equipped with the Orthodontic Angulating Work Table, the Ray Foster 12" Model Trimmer speeds trimming of study models, and produces accurate and attractive results. The Orthodontic Angulating Work Table, made from hardened anodized aluminum for a long, accurate work life, is calibrated for precise positioning and trimming of models. Accessories supplied with the Orthodontic Model Trimmer include Vertisquare, Angle Guide, and 70mm Adjustment Gauge.</p> <h4>Model Mt15</h4> <h5>Specifications</h5> <ul> <li>1/2 HP motor, with 1.25 service factor producing .625 HP actual power</li> <li>12" dia., 1/4" thick grinding wheel</li> <li>5-1/4" wide, 5" high cutting surface</li> <li>17" high, 17" wide, 16" deep</li> <li>115 volt, 60 Hz standard</li> <li>230 volt, 50/60 Hz optional for export</li> <li>Net weight 41 lbs, shipping weight - 49 lbs</li> </ul>

<h2>10" Model Trimmer</h2> <p>Ray Foster Model Trimmers are constructed from heavy gauge cast aluminum with stainless steel and solid brass fittings. The machines are finished, inside and out, with a high gloss white epoxy coating that offers durability, corrosion resistance, and a very attractive finish. Resiliently mounted and precision balanced for smooth, quiet operation, they are designed to assure years of service free performance under the most demanding laboratory use. The Ray Foster Model Trimmers are the original "swinging door" trimmer and is the benchmark by which other model trimmers are measured.</p> <h4>Model MT10</h4> <p>The MT10 offers all the features of the MT12 in a compact design. It is the ideal fit in the close quarters of a doctor's office laboratory, and also performs very well in the demanding environment of a commercial laboratory.</p> <h5>Specifications</h5> <ul> <li>1/3 HP motor, with 1.35 service factor producing .45 HP actual power</li> <li>10" diameter, 1/4" thick grinding wheel</li> <li>4" wide, 4-1/4" high cutting surface</li> <li>14" high, 14" wide, 15" deep</li> <li>115 volt, 60 Hz standard or 230 volt, 50/60 Hz optional for export</li> <li>Net weight 32 lbs, shipping weight 38 lbs</li> </ul>

<p>Equipped with the Orthodontic Angulating Work Table, the Ray Foster 12" Model Trimmer speeds trimming of study models, and produces accurate and attractive results. The Orthodontic Angulating Work Table, made from hardened anodized aluminum for a long, accurate work life, is calibrated for precise positioning and trimming of models. Accessories supplied with the Orthodontic Model Trimmer include Vertisquare, Angle Guide, and 70mm Adjustment Gauge.</p> <h4>Model Mt15</h4> <h5>Specifications</h5> <ul> <li>1/2 HP motor, with 1.25 service factor producing .625 HP actual power</li> <li>12" dia., 1/4" thick grinding wheel</li> <li>5-1/4" wide, 5" high cutting surface</li> <li>17" high, 17" wide, 16" deep</li> <li>115 volt, 60 Hz standard</li> <li>230 volt, 50/60 Hz optional for export</li> <li>Net weight 41 lbs, shipping weight - 49 lbs</li> </ul>