| Load up the cart! $9.99 flat shipping. |
Your shopping cart is empty!
-250x250.jpg)
Handler Manufacturing
<h1>Clamps-Specify 3" Or 4"</h1>
<p> </p>
<p> </p>
<p>Available in standard 3” [7.6cm] or 4” [10cm] diameter for use in securing flexible ducting to rigid 3” [7.6] or 4” [10cm] diameter connections.</p>
<p> </p>
<p> </p>
$8.95
<h1>Copper Tubing/Ft</h1>
<p> </p>
<p> </p>
<p>1/4” O.D. (6.4mm) tubing for use in supplying a permanent water connection from a larger water line to a model trimmer with the use of a Tap-n Tap, solenoid valve or other compatible valve. Sold per foot.</p>
<p> </p>
<p> </p>
$25.95
<h1>Nylon Coil Air Hose - 10 Foot</h1>
<p> </p>
<p> </p>
<p>Coiled nylon air hose with 1/4” [0.6cm] NPT swivel fittings both ends. 10 feet (3 meters) in length with coil extended fully.</p>
<p> </p>
<p> </p>
$32.95
<h1>Rapid Connect-Disconnect</h1>
<p> </p>
<p> </p>
<p>Air coupler designed for rapid connection or disconnection of 1/4” [0.6cm] NPT air line. Zinc plated for extended service.</p>
<p> </p>
<p> </p>
$32.95
<h1>Rubber Air Hose</h1>
<p> </p>
<p> </p>
<p>Rubber covered braided air hose. Five feet in length with 1/4” [0.6cm] NPT fittings both sides.</p>
<p> </p>
<p> </p>
$32.95
<h1>Rubber Blow Gun</h1>
<p> </p>
<p> </p>
<p>A rubber tipped air blowgun for tabletop and bench use. Connects to a standard 1/4” [0.6cm] NPT air and activates with the bending movement of the rubber nozzle.</p>
<p> </p>
<p> </p>
$32.95
<h1>Push Button Blow Gun</h1>
<p> </p>
<p> </p>
<p>Metal, nickel plated blow gun activated by depressing push button on top of gun. Connects to standard 1/4” [0.6cm] NPT air line.</p>
<p> </p>
<p> </p>
$39.95
<h1>Lever Blow Gun</h1>
<p> </p>
<p> </p>
<p>Metal, nickel plated blow gun activated by depressing lever located on top of gun. Connects to standard 1/4” [0.6cm] NPT air line.</p>
<p> </p>
<p> </p>
$42.95
<h1>Bench Mounted Flange</h1>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p>A finely finished chrome plated cast bronze 3/8” [1cm] NPT fitting for mounting single air, gas or water valves</p>
<p> </p>
<p> </p>
$52.95
<h1>Turret</h1>
<p> </p>
<p> </p>
<p>A 90 degree turret for mounting air or gas valves at a 90 degree angle to tabletop. 3/8” [1cm] NPT pipe connection.</p>
<p> </p>
<p> </p>
$52.95
<h1>Chrome Cast Flange - Connect Air/Gas Line To Bench</h1>
<p> </p>
<p> </p>
<p>Designed for use with 3/8” NPT air or gas valves, this chrome plate, cast bronze flange provides an aesthetic positive connection to all 3/8” air or gas connections.</p>
<p> </p>
<p> </p>
$57.95
<h1>Air Valve</h1>
<p> </p>
<p> </p>
<p>Tapered air valve with positive lever shut-off control and 3/8” [1cm] NPT pipe connector. Chrome plated with rear chrome backplate.</p>
<p> </p>
<p> </p>
$62.95
<h1>Gas Valve</h1>
<p> </p>
<p> </p>
<p>Tapered gas valve with positive lever shut-off control and 3/8” [1cm] NPT pipe connector. Chrome plated with rear chrome backplate.</p>
<p> </p>
<p> </p>
$62.95
<h1>Stainless Steel Waste Chute Insert</h1>
<p> </p>
<p> </p>
<p>Stainless steel waste chute insert helps direct the waste flow into the trash receptacle keeping the environment cleaner.</p>
<p> </p>
<p> </p>
$79.00
<h1>Stainless Steel Wortk S+C232urface Protector</h1>
<p> </p>
<p> </p>
<p>Sturdy stainless steel work surface protector.</p>
<p> </p>
<p> </p>
$99.00
