<div>
<p>Manual Diamond Strips Afford the Best Clinical Control</p><ul>
<li>Color coded, single sided mesh with center gateway</li>
<li>Perforated — will not clog</li>
<li>Use for breaking interproximal contact and recontouring enamel</li>
<li>5-3/4” length, offered in two widths: 2.5 and 3.5mm</li>
<li>10 per pack</li>
</ul>
</div>
$111.54
<div><p>Manual Diamond Strips Afford the Best Clinical Control</p><ul><li>Color coded, single sided mesh with center gateway</li><li>Perforated — will not clog</li><li>Use for breaking interproximal contact and recontouring enamel</li><li>5-3/4” length, offered in two widths: 2.5 and 3.5mm</li><li>10 per pack</li></ul></div>
$111.54
<div>Quick drying alcohol based. Environmentally friendly aerosol. Easily applied.</div>
$36.79
<div>Chromatic with hydrocolloid stability. Three phase color change (Violet, Rose, Light Blue). Fast set - total time from start (mixing) to finish set, approximately 3 minutes. Up to 120 hours of dimensional stability. Lead, cadmium, and dust free.
</div>
$14.25
<div>Assortment of 50 Trays - 5 of each size, (Pedo, X-Small, Small, Medium, and Large) Upper and Lower. Six unique mechanical "locks" hold impression material firmly in place. Tray adhesive not required.
</div>
$35.18
<ul>
<li>Gold Titanium Nitride Coated Handpiece Burs</li>
</ul><div>
<ul>
<li>• Designed for acrylic and metal finishing</li>
<li>• Extended cutting life – GTN coating adds up to 10 times the useful life vs. uncoated carbide</li>
<li>• 3/32” diameter shaft for use with low speed handpieces
<ul>
<li>#1 - Taper</li>
<li>#2 - Pointed</li>
<li>#3 - Wide</li>
<li>#4 - Narrow</li>
<li>#5 - Medium</li>
</ul>
</li>
</ul>
</div>
$14.48
<div>Latex and BPA free. Aligners, "Invisible" retainers, MTM appliance. Material combines strength and clarity. More durable than our ComfortForm. Very CLEAR after forming - easily cleaned. Will bond to acrylic. Available in two thicknesses, .030" and .040". Square or round. Expected use 18-24 months. For use with most vacuum forming machines (including Biostar) 5 inch (133mm) square and 4.92 inch (125mm) round.</div>
$31.73
<div>Latex and BPA free. Temporary - Bite planes, retainers, bridges. CLEAR - arrives in moisture resistant mylar pouch. Forms thin and rigid for a good fit. Will bond to acrylic. Available in two thicknesses .040" and .060". Available in square and round. Expected use 6 months. For use with most standard vacuum forming machines (including Biostar) 5 inch (133mm) square and 4.92 inch (125mm) round.
</div>
$75.89
<div>Strong, stain Resistant
Plastic Resin
• Smooth, strong, low profile with grooved base
• Easily bonded to most plastic aligners (use acrylic resin) and
teeth using typical bonding
• 10 per pack</div>
$24.25
<div>Six unique mechanical "locks" hold impression material firmly in place. Tray adhesive not required.</div>
$45.99
<div>
<p>Ensure accurate, predictable activation</p><ul>
<li>Advancement pin is easy to insert</li>
<li>After 1/4 turn advancement pin is held in place – no accidental back-driving</li>
<li>Ergonomic lightweight design</li>
<li>Single patient use</li>
</ul>
</div>
$24.71
<div>See the difference - clearer images than metal. Highest reflective value - front surface optical image - no double reflections. Durable rhodium-coated, double sided, 1/8" thick. Steam autoclave, dry heat (375 degrees max.) or cold sterilization (glutaraldehyde).</div>
$71.09
<div>Highly polished solid stainless steel. Angled 30 degrees, double ended for child or adult. Will not chip, peel, or crack. Steam autoclave, dry heat or cold sterlization (glutaraldehyde only). Both sides polished to image quality for extended life.</div>
$59.21
<div>Highly polished solid stainless steel. Angled 30 degrees, double ended for child or adult. Will not chip, peel, or crack. Steam autoclave, dry heat or cold sterlization (glutaraldehyde only). Both sides polished to image quality for extended life.</div>
$58.64
<div>Now two types to choose from! Standard Replica and new 3-Phase Color Change Kromatica. Both made in the USA, both provide reliable and accurate detail. Fast set - total time from start (mixing) to finish approx. 3 min. Quick wetting for a super smooth consistency.</div>
$12.18